Websites from $499 / You own everything, day one / Spokane & the Inland Northwest
Contractor website design in Spokane, from $499
Contractor website design in Spokane starts at $499. This is the page for residential trades and remodelers — the people whose work arrives as a phone call about a bathroom, a deck or a kitchen. The whole job of that site is to turn a stranger into a booked estimate you were right to drive to.
What a Spokane contractor website has to do to bring in work
What actually earns the call.
A page for each thing you do
Kitchen remodels, bathroom remodels, decks, additions, basement finishing, siding. One page each, with what the work involves, what it typically runs, and photographs of yours. A single Services page listing eight trades ranks for none of them, and it forces the homeowner to work out for themselves whether you do their job.
Photographs of your own jobs, in order
Before, during and after, from the same angle, with a one-line caption saying where and roughly what it cost. Stock photography is spotted instantly by anyone who has hired a contractor before, and a gallery with no captions is just wallpaper. Ten well-shot jobs beat fifty phone snaps taken in bad light.
A quote form built to qualify, not just collect
Project type, rough budget band, timeline, and the address or at least the neighborhood. Four extra fields cost you a small number of inquiries and save you a large number of wasted drives. This one change is usually worth more than every other decision on the site combined.
Mobile-first, because that is where the call starts
Homeowners look for a contractor on a phone, often standing in the room they want changed. The phone layout gets designed first and the desktop version follows from it. A site that is awkward on mobile loses the visitor before they reach the gallery.
License, bond and insurance stated plainly
Your Washington contractor registration number, your bond and your insurance, in the footer on every page. Homeowners are told repeatedly to verify a contractor before hiring, and the ones who do will find you faster if you have made it easy.
The SEO structure and page speed handled during the build
Heading hierarchy, descriptive URLs, internal links, schema markup, compressed photography and per-page titles. This decides whether ‘bathroom remodel Spokane Valley’ ever finds you, and it is the part cheap builds leave out because it does not show up in a screenshot.
A quote form that stops you driving to unqualified estimates
Most contractor websites ask for a name, an email and a message. That form is cheap to build and expensive to own, because it hands you inquiries with no information in them and you find out on the driveway that the budget is a third of the job. The fix is four more fields: what the project is, roughly what the homeowner expects to spend, when they want it done, and where the property is.
Contractors resist this because it feels like friction, and it is — deliberately. You will get fewer inquiries and more of them will be worth an hour of your day. A budget band with an honest lowest option (‘under $5,000’) does more filtering than any other single field, and it does it without anyone having to have an awkward conversation. Give people a way to say they are still deciding, so you capture the ones who are six months out rather than losing them.
Where the form goes matters as much as what it asks. It belongs at the bottom of every service page, not on a separate Contact page the visitor has to go looking for, and it needs to be usable one-handed on a phone. Then it needs testing — actually submitted, actually confirmed to land in the inbox you read. A quote form quietly discarding inquiries is the single most common thing we find broken when we take over someone else’s site.
Service-area pages for Spokane Valley, Liberty Lake, Cheney and Deer Park
A Spokane contractor’s service area is not one place. Work in Spokane Valley, Liberty Lake, Cheney, Deer Park, Airway Heights and across the state line to Post Falls all behaves differently — different housing stock, different ages of home, different jobs. Someone in Liberty Lake searching for a deck builder is looking for someone who works in Liberty Lake, and a site that only ever says ‘Spokane’ is asking them to assume.
The version that works is a real page per area you genuinely serve, saying what you have actually built there, what the housing tends to be, and how far you travel. The version that fails is a dozen near-identical pages with the town name swapped, which reads as spam to a homeowner and gets treated as such by Google. If you cannot write two honest paragraphs about working in a town, it does not get a page — it gets a line on the coverage map instead.
Keep it to the places you will actually drive to. A page for Colville that produces one inquiry you turn down is worse than no page, because you have spent the trust and the visit on nothing.
Owning your leads instead of renting them from Angi and Thumbtack
Plenty of Spokane contractors get most of their work from Angi, Thumbtack, HomeAdvisor or Nextdoor, and there is nothing wrong with that as a channel. The problem is the economics: you pay per lead, the lead is usually sold to several contractors at once, and you are competing on response speed and price within minutes of it landing. Your cost per booked job only goes one direction over time, and you cannot influence it.
A website you own changes the shape of that. The inquiry arrives already knowing your name, having seen your work, having read your prices — so the conversation starts somewhere different and the close rate is not comparable to a shared lead. It also compounds: a service page that ranks keeps producing without a further payment, whereas a marketplace lead is bought once and consumed once.
The honest version is that this takes months, not days, and the marketplaces keep the lights on while it happens. We would rather say that than pretend a $499 website replaces your lead spend in week one. What it does do is give you somewhere for that spend to eventually go, and a set of pages that keep working when you stop paying.
Showing your Washington contractor registration, bond and insurance
Washington requires contractors to register with the Department of Labor & Industries, and registration carries a bond and liability insurance with it. The state publishes a public lookup so homeowners can verify a registration, check whether it is active, and see whether there are claims against the bond. Consumer advice in this state points people at that tool constantly, which means a meaningful share of your visitors will check.
So make it easy. Registration number in the footer on every page, bond and insurance stated, and specialty certifications named where you hold them — lead-safe renovation certification, manufacturer certifications, any trade licenses your work requires. Where a certification has an expiry, keep it current on the page; a lapsed date on a website is worse than no date.
None of this is a design decision, and that is rather the point. It is the cheapest trust you can buy and most contractor sites in this market still bury it on an About page or leave it off entirely.
How we build a Spokane contractor website, discovery to launch
Scope
The trades you want more of, the towns you actually drive to, what the quote form has to ask.
Design
You see the real homepage and one real service page before the rest gets built.
Build
Service pages, galleries, area pages, quote form tested end to end, structure and speed included.
Handover
Domain, hosting and files in your name. You add job photos yourself from your phone.
Contractor website design pricing for Spokane trades
Contractor website design in Spokane starts at $499 for up to 15 pages, $999 for 16 to 50, and $1,499 for 51 or more. A remodeler with six service pages, a gallery and three or four genuine service-area pages sits comfortably in the first tier. The prices are published rather than held back for a call, and if the job does not fit a tier we say so in writing with the reason.
Contractor website design questions from Spokane contractors, answered
How much does a contractor website cost in Spokane?
$499 for up to 15 pages, $999 for 16 to 50, and $1,499 for 51 or more. Most Spokane remodelers and residential trades fit the first tier — a homepage, six or so service pages, a gallery, a few honest service-area pages and a quote form. The tiers are published, so you can size your own job in about a minute without booking a call first.
Do contractors really need a website if they get leads from Angi?
You do not need one to get work today. You need one to stop paying per lead for work you could have had for free next year. Marketplace leads are usually sold to several contractors at once and you compete on speed and price within minutes; an inquiry from your own site arrives having already read your prices and seen your jobs. Most contractors run both for a year and then shift the balance.
What should a contractor website include?
A page for each service you sell, photographs of your own completed jobs with captions, a quote form that asks for project type, budget band, timeline and location, your Washington contractor registration and bond, honest service-area pages for the towns you actually drive to, and a phone-first layout. Everything else is decoration.
Should I put prices on my contractor website?
Ranges, yes. Exact figures, rarely — the job is the job. But a bathroom remodel page that says ‘most of ours run $12,000 to $30,000 depending on layout changes’ will filter your inquiries better than any form field and it costs you nothing but the customers you were never going to close anyway.
How many service-area pages should I have?
As many towns as you can write two honest paragraphs about, and no more. Real pages for Spokane Valley, Liberty Lake, Cheney or Post Falls earn their place if you genuinely work there and can say something specific. A dozen pages with the town name swapped and nothing else changed reads as spam to homeowners and gets treated that way in search.
Can I add job photos to the site myself?
Yes, straight from your phone. Adding a job to a gallery, updating a service page or changing your hours are all done through the editor without touching code, and we show you how at handover. A gallery that only we can update is a gallery that stops getting updated in month three.
How long does a contractor website take to build?
You approve the design before anything is built, which removes the part that normally drags on. After that a first-tier build usually runs a couple of weeks. The date is written into the quote rather than discovered halfway through.
Will I lose my Google rankings if you rebuild my site?
Not if it is planned properly. Pages that currently earn traffic keep their URLs, and anything replaced gets a redirect so the rankings follow across instead of resetting. It is the most common way a rebuild goes wrong and it is entirely avoidable, but it has to be decided before the build.
Related pages
Secure your Spokane contractor website
Tell us which trades you want more of and which towns you drive to. You’ll get a price and a timeline back in writing.